Valery72

De BISAWiki

Polished concrete flooring is quite well-liked in homes and businesses these days as a result of its versatile traits. You'll be able to get the sophisticated appear of a marble flooring but at a fraction in the cost. Polished concrete flooring can also be tough, extended lasting, reduces allergens and reflects light producing it eco-friendly. It is also sensible as you're just utilizing supplies which are currently present so there is no have to buy further flooring supplies. Polishing a concrete floor at home or in an workplace can convert your boring grey floors into beautiful, shining floors to be proud of.

This guide will clarify the process of how you polish concrete. It's not the easiest DIY job in the globe and it really is also pretty messy, but in the event you take your time you are going to get a good result.

Products you are going to have to polish a concrete floor

- Industrial grinding machine - dry upright machines are recommended.
- 30, 80, & 150 metal-bonded diamond grit discs
- 100 to 3000 grit resin-bonded discs
- Safety goggles
- Ear defenders
- Dust protection mask
- Cement epoxy or difficult drying filler
- Cement hardener

1) Visit your local hardware rental retailer and rent an upright, walk behind grinder. Concrete grinders usually come in two variations, wet and dry. A dry grinder sucks the dust up like a vacuum cleaner as you work and keeps the air clean. The wet grinder uses water to control dust but tends to make the job a lot messier as you'll have a lot more cleaning to complete once you're finished.

2) Buy a set of diamond abrasive discs to use with all the grinder. The discs are numbered with larger numbers corresponding to a finer abrasive. You are going to start out with a coarse abrasive and slowly function your way up the finest grit disc to give the floor to great polished finish.

3) At all occasions ensure you wear your safety equipment. Goggles, ear defenders along with a dust mask are essential as the job can create a whole lot of dust which can be harmful is ingested.

4) The first stage from the process would be to use coarse diamond grit disc to remove any current floor coatings and prepare the surface for the later stages. At this stage you should also prep the floor by filling any cracks or producing any repairs that must be done.

5) Start grinding the floor by starting from a single corner, slowly working your way across the entire surface. Begin with a 30 grit metal-bonded abrasive and continue with 80 metal-bonded grit. Finish the grinding method with 150 metal-bonded grit.

6) After you have evenly ground the complete floor making use of the 150 metal-bonded disc, apply a chemical concrete hardener to the floor. This will help you achieve a higher gloss finish for the floor.

7) After the chemical hardener has set you are going to have to change discs around the grinder to use the finer grit resin-bonded discs. Polish the concrete floor starting with all the one hundred resin-bonded grit disc, continuing the method making use of 400 resin-bonded grit then 800 resin-bonded grit, till you get the preferred shine. You are able to use as much as three,000 resin-bonded grit to obtain a truly perfect shine!

References:

concrete polish Miami
grinding service