Cleansing your hearing aids 874

De BISAWiki

Hearing aids which fit in the head.

When removing your hearing aid before you go to bed you should vigilantly wipe down with a dry cloth or tissue. You should also audiology gilbert az invest some time checking the the main hearing aid that fits in to the ear canal since it is probable that a of ear wax might have happened. If this is a ctually the case then you'll need to remove the wax. You must obtain a cleaning device which can be used to do this which usually takes the form of a pick or a brush when you bought the hearing aids or you could also use a brush.

Hearing products which fir behind the ear.

As with the above, the procedure is comparable. But, the key big difference being the ear mold which fits into the ear which is generally made of Lucite or silicone which is non-electrical and therefore can be cleaned in mild soapy water. Before washing it's important to ensure the earpiece is disconnected from the behind the ear area to ensure the electrical part of the hearing aid does not get wet. Dry the head piece properly before using and also make certain that the tube is away from water. Please note that the tube may have to be changed after a time period generally 3 to 6 months since the mobility may be lost.

Things not to do

1. Wash the hearing aid with solvents or alcohol as this could cause the materials where the aid was created to break down. You can aquire special cleansing fluids made to clear hearing aids.

2. Dont allow part of the hearing aid get wet. Prevent wearing the aid when bathing of washing.

3. Try not to drop the hearing aid, especially on the hard ground as the hearing aid may be caused by this to break.