Janita255
De BISAWiki
This article is going to be about replacing an old sliding glass door having a modern Vinyl frame sliding glass door. Should you presently have french doors and also you wish to replace them with sliding doors, or vise versa, future articles will cover that subject.
The first thing we have to complete is measure for the replacement door. You want to measure across the bottom, center, and top of the existing door frame to locate the narrowest dimension. Commence outdoors and measure at the point exactly where the old door frame stops and also the exterior material begins. That material could be stucco, siding, or brick. Measure across inside the three areas: bottom, center, and best. Record the smallest dimension. Then go inside and do exactly the same factor. You would like to measure exactly where the frame ends and also the drywall, plaster, or sheetrock begins. Take all six measurements, discover the narrowest 1, and deduct 3/4". That's the width in the new door. Now, whenever you measure the height, you can do it just on the outdoors. Measure the left, center, and correct side from the ground exactly where the bottom track sits, as much as the leading exactly where the old frame ends and the exterior material starts. Take the narrowest dimension and deduct 1/2". That is your height in the new door. Then, figure out which side the sliding panel ought to be on. The fixed panel is designated by the letter "O", and also the slider is definitely an "X". In most places of the nation, you get in touch with it out by seeking in the door from outside and reading left to correct. So, should you had been outside seeking at your door, and also you want the sliding panel to close for the proper wall, you'd ask for an "OX". However, simply because i've recently found that not all components in the country do it this way, my suggestion would be to ask the dealer how they study the opening just before placing your order.
Next, you've to decide regardless of whether you need a retrofit frame or perhaps a replacement frame. In the event the old frame is flush with the exterior material, such as inside the case of stucco, then you need to get the retrofit frame, which comes using the outside fin. That will get rid of the have to trim the outdoors. For those who have brick or siding surrounding the opening, then you must get a replacement frame and trim the outside oneself. You'll be able to use wood, vinyl, or other composite components available in most major hardware retailer chains. You also need to measure the depth in the old frame. The majority of vinyl replacement doors have a frame depth of 4 3/4". Most door openings, when framed, possess a depth of 5 1/2" to the innermost surface of the wall, whether it's drywall, plaster, or whatever else. Consequently, once you set up the new door, you'll need to add some sort of trim product to develop the inside in the door frame so it's flush using the wall surface.
You would like to become positive and order all the components you will need to do the job at the identical time that you simply order the replacement door. That way, when the new door comes in 2 to 4 weeks later, you will have every little thing able to do the job. In addition to any trim needed, you might be also going to want caulk, a roll of R-13 Insulation, liquid nails for the track, 4" deck screws, shims, dust masks, and safety glasses. Once the new door arrives, it will be time to take out the old door. Which will be our topic in subsequent week's post.
References:
Read More
Glazenmaker
