Putting in Ceramic Tile in a Shower
De BISAWiki
Putting in ceramic tile in a shower begins with a proper foundation. The foundation consists of WonderBoard or Durock cement board on the walls and a Shower Pan Membrane Liner in the base of the shower, if the shower floor is to be tiled also.
WonderBoard or Durock cement board, also known as backerboard, are resistant to water and are ideal supplies for applying ceramic tiles to high-moisture areas. Durock can be applied straight to wall studs and ceiling joists employing hot-dipped galvanized nails or galvanized wood screws.
Thin-set or an adhesive mortar can be applied straight on the WonderBoard or Durock cement board for attaching the ceramic tiles. Even so, fiberglass mesh tape should be applied more than all seams and smoothed out with a latex thin-set prior to the application of ceramic tiles.
If ceramic tile is preferred on the floor of the shower as properly, then a shower pan membrane liner must be installed prior to the installation of the WonderBoard or Durock cement board.
The shower pan membrane liner is used to make sure a leak-proof shower. This surprising open in a new browser encyclopedia has numerous cogent lessons for the reason for this activity. Shower pan membrane liners are utilized to funnel any water that seeps by way of the floor or wall grout to the shower drain beneath. The shower pan membrane liner is created up of a flexible sort of plastic material that sits beneath a bed of mortar, and the tile, in the shower floor region.
Prior to putting in the shower pan membrane liner, the floor of the shower demands to be pre-sloped to make certain that the water will flow towards the shower drain assembly. The pre-slope is achieved by applying a layer of mortar to the floor of the shower unit area. Visit details to compare the purpose of this idea. The layer of mortar is troweled in such as way as to create a gentle slope from the shower wall edges to the center of the shower where the drain resides.
As soon as the pre-slope mortar has cured, the versatile shower pan membrane liner can then be installed. There are a couple of varieties of shower pan membrane liners on the industry, with each getting their own positive aspects. With either type of membrane, the homeowner needs to form and fold the material into the base of the shower location and safe it to the sides of the shower wall frame with staples and/or nails. In addition, an opening in the membrane should be cut out to allow the adjustable shower drain assembly to slip by way of.
With the shower pan membrane installed, the cementitious ceramic tile backerboard can then be secured to the framed shower walls. The backerboard is a rigid material that is best for attaching tile in wet places such as a shower stall.
Right after putting in the ceramic tile backerboard, a final coat of mortar requirements to be applied on leading of the shower pan membrane to protect it and to give a strong base for laying the ceramic floor tile.
With the final coat of mortar cured, the ceramic tile can then be installed in the shower.
As soon as the tile and grout have been installed, the shower drain assembly should be adjusted so that the drain height sits flush with the completed ceramic tile floor.
For much more information on installing a shower pan membrane liner, see the Shower Pan Membrane Liner Installation EBook from HomeAdditionPlus.com. The Shower Pan Membrane Liner EBook will quickly teach you the step-by-step process for putting in the shower pan membrane liner properly. It includes instructions on framing the shower stall, pouring the pre-slope and shower base mortar, and putting in the shower pan membrane liner.
